Attractions
Calibration is required in the process of controlling our equipment if we are to ensure the traceability of measurements.
With the help of etalon weights we verify the accuracy of our indication, eccentricity and repetability.
Sale
more
The foundation of accurate measurements are high quality measuring devices. We represent the world leading manufacturers of measurement technology, which is tested in our own laboratory. We also issue calibration certificates for measuring devices.
Measuring devices for tachometers and type approvals
Roller track
Calibration of speed sensors (at 50 km/h with a direct measuring method), tyre diameter measurement (with a direct measuring method), roller diameter measurement in accordance with the international recommendations and manufacturer's instructions.
The recommended period for calibrating the roller track in tachometer workshops is 1 year.
Tachometer control unit (with interface)
KControl unit (programmer) – calibration of impulse sensor (manual and automatic measuring method), K-factor, speed in the range from 20–180 km/h (K-value: 2500, 8000, 24000) and timer (24 h error) in accordance with the international recommendations and manufacturer's instructions ( BTC; MTC, CTC, MKII, CTCII,...).
The recommended period for calibrating the control unit in tachometer workshops is 1 year.
Tachometer service unit (also possible in connection with the control unit
Calibration of tachometer service unit (STC) – K-factor, mechanical drive (km/h, min-1 and revolutions), voltage (6V, 12V, 24V), electric drive (km/h and min-1).
The recommended period for calibrating the service unit in tachometer workshops is 1 year.
Other device in tachometer workshops (service equipment)
Calibration of manometers, FG 94, pulse counter ZG 20/84,…
Thermometers
Calibration of all types of thermometers, humidity gauges, absolute pressure measuring devices (barometers).
We recommend that you calibrate the measuring devices every year.
.jpg)
Tyre pressure manometers
We recommend that you calibrate the tyre pressure manometers every year.
Manometers that are being used for statutory purposes should be accredited every year.
.jpg)
Length measuring devices
Tyre depth gauges, vernier callipers and micrometers (length measuring devices).
The recommended period for calibration in tachometer workshops is 1 or 2 years.
Stop watch
We recommend that you calibrate it every year.
Light transmission measuring device
According to the manufacturer's instructions the light transmission measuring device should be calibrated every year or every 2 years.
