Attractions
Calibration is required in the process of controlling our equipment if we are to ensure the traceability of measurements.
With the help of etalon weights we verify the accuracy of our indication, eccentricity and repetability.
Sale
more
The foundation of accurate measurements are high quality measuring devices. We represent the world leading manufacturers of measurement technology, which is tested in our own laboratory. We also issue calibration certificates for measuring devices.
Pressure
.gif)
RANGE
- from -0,9 bar to 600 bar
 |  |
WE PERFORM
- Calibration of:
- mechanic manometers, vacuum meters in accordance with standard SIST EN 837,
- electro-mechanic pressure measuring devices in accordance with document EA-10/17,
- environment pressure measuring devices.
- Evaluation of:
- pressure chambers.
- Execution in our laboratory or on-site.
 .jpg)  |
WHY PERFORM CALIBRATION
- In case of greater pressure shocks, accuracy of pressure measuring devices decreases quicker,
- accuracy of pressure measuring devices is not stable time-wise,
- we verify accuracy between set and actual pressure,
- we determine hysteresis of pressure measuring devices.
Certificate, which you are provided with after each calibration, ensure measuring traceability of measuring devices with establishment and maintenance of quality systems (ISO certification), laboratory accreditation and is in accordance with requirements GMP, GLP and GCP.
CALIBRATION PERIOD
Calibration period is set in accordance with standards or recommendations for ensuring quality of measuring equipment SIST ISO 10012, ILAC-G24 / OIML D10.
DETAILED SCOPE OF ACCREDITATION
 | Annex to the Accreditation Certificate | LK-008 |
| Issued on | 15. junij 2011 | |
| Replaces Annex dated | 1. april 2011 | |
| Information on current accreditation status is available at: | www.sa.gov.si |
| In laboratory |
| Measured quantity | Range | Best measuring capability BMC (k=2)* | Notes |
| 5 |
| MECHANICAL QUANTITIES |
| 5.4 |
| Pressure |
| Depression |
| - 0,9 bar to 0 bar | 0,085 mbar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Overpressure |
| 0 mmHg to 300 mmHg (0 kPa to 40 kPa) | 0,064 mmHg 8,5 Pa | Medium: gas Measuring instruments: blood pressure manometers | ||
| 0 bar to 1 bar | 0,085 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical | ||
| 1 bar to 35 bar | 4 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical, tire pressure gauges for motor vehicles | ||
| 35 bar to 250 bar | 0,3 bar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical | ||
| 250 bar to 600 bar | 1,7 bar | Medium: fluid; Measuring instruments: mechanical, electro-mechanical |
| Absolute pressure |
| 0,1 bar to 2 bar | 0,17 mbar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Evaluation of chambers |
| 0,1 bar to 5 bar | 0,15 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| On site |
| Measured quantity | Range | Best measuring capability BMC (k=2)* | Notes |
| 5 |
| MECHANICAL QUANTITIES |
| 5.4 |
| Pressure |
| Depression |
| - 0,9 bar to 0 bar | 0,085 mbar | Medium: gas Measuring instruments: mechanical, electro-mechanical | ||
| Overpressure |
| 0 mmHg to 300 mmHg (0 kPa to 40 kPa) | 0,064 mmHg 8,5 Pa | Medium: gas Measuring instruments: blood pressure manometers | ||
| 0 bar to 1 bar | 0,085 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical | ||
| 1 bar to 35 bar | 4 mbar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical, tire pressure gauges for motor vehicles | ||
| 35 bar to 250 bar | 0,3 bar | Medium: gas, fluid; Measuring instruments: mechanical, electro-mechanical | ||
| 250 bar to 600 bar | 1,7 bar | Medium: fluid; Measuring instruments: mechanical, electro-mechanicali |
| Absolute pressure |
| 0,1 bar to 2 bar | 0,17 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
| Evaluation of chambers |
| 0,1 bar to 5 bar | 0,15 bar | Medium: gas; Measuring instruments: mechanical, electro-mechanical |
WHY CHOOSE US
- Slovenian accreditation constantly audit our technical staff and equipment,
- we provide quick reaction time from order to service implementation,
- constant training of our staff enables us quality service,
- all of our measuring equipment has secured measuring traceability on national or international etalon,
- we inform you regularly on the date of next calibration,
- MeOL: electronic monitoring of measuring devices over the Internet,
- trust of auditors and inspectors in our results,
- we are always available to provide information.
SALE
TRAINING
